Liquid nitrogen generator 3000 KDN-3000 Inert Gas GAN Nitrogen Gas
KDN Series Nitrogen Generator
Typical Product: KDN-3000 Liquid nitrogen generator
Output, purity and pressure
This plant employs a process in which the air is purified by
molecular sieve, expansion turbine is provided with braking
effected by fan and nitrogen is produced by means of single column
with expansion accomplished through backflow. After the feed air is
cleaned of dust and mechanical impurities in air filter, it is
compressed in air compressor to a pressure of approx. 0.9 Mpa(G).
The compressed air is then fed into air pre-cooling system. When it
is cooled to about 5℃, it becomes saturated.
The saturated and compressed air flows into switched molecular
sieve adsorbers where such hydrocarbons as H2O, CO2 and C2H2 are
adsorbed from the air.
A small part of purified process air is drawn out to be used as
instrument air and the remainder is fed into main heat exchanger.
The expanded waste nitrogen is drawn, which cooled after being
expanded to a saturation temperature and moisture- bearing to a
certain extent, is throttled into the bottom of nitrogen column for
participation in rectification. The nitrogen gas and liquid
nitrogen are then obtained at the top of nitrogen column while the
saturated and oxygen-rich liquid air at the bottom of column is
throttled into the evaporation side of condenser evaporator to
condense the nitrogen gas at the top of column.
Oxygen-rich liquid air at the evaporation side of condenser
evaporator is heated and vapored to be saturated gas by nitrogen
gas at the top of column, and then it is drawn out and into cold
end of main heat exchanger, after being rewarmed, it is drawn out
and into turbo-expander to be expanded and refrigerated. Expanded
oxygen-rich liquid air enters main heat exchanger to be rewarmed to
normal temperature and to be fed out of cold box; partial gas is to
be regeneration gas for molecular sieve adsorber, the rest is
The nitrogen gas and liquid nitrogen are drawn out of the top of
nitrogen column. The nitrogen gas flows out of cold box to the
client with the required pressure by client after it is reheated in
main heat exchanger to a normal temperature. The liquid nitrogen
will be drawn out of the top of column and throttled to the
required pressure and fed out of cold box to the storage tank, and
is used as the spare gas of pure nitrogen equipment.
1. Generate Vegetable Maturity Gas
2. Enrichment Gas
3. N2 Converter Rental
4. Standard Gas
5. Medical science
1. Our company is the biggest air separation plant design and
2. The design philosophy of this nitrogen plant is long, stable and
reliable running, economization of energy, convenient operation and
3. The advanced design and processing software from NREC of USA is
used to design the performance & passages of expander and to
process the passages.
4. The five-axis simultaneously controlled machine centre imported
from Sweden is available for the precision processing of 3
dimensional shrouded impeller so as to ensure the highest running
efficiency and stability of expander.